The Peheja® concept & your advantage

The unique concept of the Peheja® cable dual control system is based on a universal base unit and vehicle specific mounting supplements & sets that can be re-used many times. You purchased the universal basic unit once. After that, you can use it for at least 10 years in any type of vehicle. This will save at least 35% per re-installation compared to a new dual control system. By using specially developed steel supplements & brackets the damage to your vehicle is minimal and you will experience a safe and reliable feeling.

Over 1000 different sets on stock
Since the Peheja system is a universal dual control system, we have a solution for almost every vehicle. The Peheja system has been used in all major car brands, such as Audi, Volkswagen, Seat. Skoda, Renault, Citroen, Kia, Hyundai, Mercedes, BMW etc. We even have dual controls for almost every full electric cars such as Tesla, BMW, Mercedes, Volkswagen, KGM, Volvo, Zeekr, Xpeng and many more.

  • The original cable dual control system
  • Can be installed in any car, bus, truck and agricultural vehicle
  • Causes minimal damage to the vehicle
  • Save up to 35%: interchangeable from one vehicle to the other for many times
  • Works with the same precision, smoothness and reliability as the original pedals
  • TÜV Automotive Approved
  • Easy to dismount and re-install for operation

Experience the difference

Find a dealer near you

Dual control base units

Peheja® offers you two basic models: one for vehicles with manual gearshift and one for vehicles with automatic transmission. Both models are universal, meaning they can be used flexibly for all vehicles. Only the associated supplements are designed specifically for the vehicle.

Removable pedals
The brake, clutch and accelerator pedals are easy to remove by unscrewing the socket cap screws. This way you can create additional foot space if required. When the pedals are re-installed, they will be in their original position.

Coverplate
It’s also possible to mount a shield so the dual controls are less visible. This shielding can be mounted on every type of dual control system. It is commonly used in general driving school vehicles.

Dual control basic units & Different versions

Pedals with signalling
When a dual control pedal is operated an acoustic signal will sound. The examiner can notice that the dual control is being used. You don't need to disconnect the wiring when you want to remove the pedals.

Stationary clutch pedal
The Peheja dual control system always has a stationary clutch pedal. When the original clutch pedal is used, the dual control clutch pedal will not move.

Dual controls for your car
  • Brake
  • Brake & clutch
  • Brake & clutch & accelerator
  • Brake & accelerator
  • Pedal units with or without signalling pedals

Take a look how to remove the pedals

How to remove the pedals

Supplements

The unique Peheja®system is based on a universal pedal unit which is mounted parallel to the original pedals of your vehicle using steel cables. This way, no adjustments to the original system are necessary.

For each vehicle, Peheja has unique vehicle-specific steel supplements onto which the pedal pulleys are mounted on the driver’s side and the dual controls on the passenger’s side. These supplements are often mounted on the original bolts of the vehicle so that the alignment of the cables on the pulleys is perfect, the dual controls are firmly attached to the chassis and zero or minimal damage to your vehicle is caused.

Thanks to these valuable advantages we can ensure a high quality and very reliable system. You will therefore receive a 10-year warranty.

ABE & TÜV tested

Both the Peheja® system as well as our company are regularly tested by TÜV Automotive Germany. Many vehicles are also on the ABE list. Being tested and inspected regularly we maximize our motivation to develop products of the highest possible quality and safety.

Safety first & High Quality

Peheja BV only sells through a recognized dealer network in order to ensure the installation quality of the system and people's safety. All dealers receive a thorough training and are kept up to date with new developments.

All the components in the Peheja® dual controls are made from top-quality and sustainable materials, by trained and qualified mechanics.

Peter Claassen, subsidiary of Peheja in the Netherlands, installs over 3.500 Peheja systems each year. We therefore have quality checks and tests on a daily basis, guaranteeing optimal handling comfort.

Removable pedals

Brake, Clutch and Accelerator dual control

Step 1: Use the supplied Allen key and loosen the bolts of the clutch and brake pedals. The accelerator pedal is not equipped with a locking bolt.
Step 2: Pull the pedals out of the holder.

Accelerator pedal:
Grasp the accelerator pedal at the top of the dual control and pull it out of the holder

Brake and gas dual control

Step 1: Use the supplied Allen key and loosen the brake and accelerator bolts one turn.
Step 2: Pull the pedals out of the holder.

Click here to see how to remove the pedals

Universal Dual Controls

Peheja universal dual controls are designed to be as versatile as possible, making them suitable for virtually any vehicle. The basic pedal system is universal and can be used across different car models. However, to ensure a safe and secure installation, each system requires vehicle-specific mounting components. These specialised parts allow the dual controls to be properly attached to the chassis, guaranteeing stability and durability.

Without these unique mounting kits, it would be impossible to create a safe working environment for both the instructor and the student. That is why Peheja provides customised solutions for over 900 different car models, ensuring that every installation meets the highest safety standards. Our universal dual controls use a flexible cable-based system that allows for a seamless fit, preserving the integrity of the vehicle while maintaining full control and precision.

Preferred supplier

Various international vehicle manufacturers and importers worldwide have awarded Peheja BV with the status of “preferred supplier”.

In Europe we work with almost all truck manufacturers who regularly order our solutions, from dual controls to extra mirrors.

Made in Holland

The innovative Peheja® products are made by a team of highly experienced technicians and product developers in the Netherlands. The Peheja® universal cable dual control system is still being refined and is tested for safety, quality, durability and functionality continuously.

Quick and easy installation
Professional mechanics can install the Peheja® dual control system quickly and easily. Installing the system in a car usually takes two experienced mechanics about 1.5 to 3.5 hours.

More about dual controls fitting

10 years warranty on your dual control system

You will receive a 10 years warranty on the re-usable base unit, no matter how often the dual control system has been re-installed. This warranty is only valid when the product hasn't been tampered with and doesn't include wear and tear parts.